Sony Ericsson Z710i - Manual (Page 30)

This is the Internet version of the user's guide. © Print only for private use.
30 Calling
•
You used another intonation – use
the same intonation as in the
recorded voice command.
To activate voice dialing and
record names
Record names using the phone,
portable handsfree, or Bluetooth™
handsfree.
1
}
Settings
}
the General tab
}
Voice
Control
}
Voice Dialing
}
Activate
}
Yes
}
New Voice Cmd. and select a
contact.
2 If the contact has more than one
number, use
and to view the
numbers. Select the number to add
the voice command to. Record a voice
command such as “John mobile”.
3 Instructions appear. Wait for the tone
and say the command to record. The
voice command is played back to you,
if the recording quality is acceptable.
4 If the recording sounds OK to you
}
Yes . If not
}
No and repeat step 3.
To record another voice command for
a contact
}
New Voice Cmd.
}
Add
again and repeat steps 2-4 above.
Caller name
Hear your recorded contact name
when you receive a call from that
contact.
To turn the caller name on or off
}
Settings
}
the General tab
}
Voice Control
}
Play Caller Name .
Voice dialing
Start voice dialing from standby using
the phone, a portable handsfree, a
Bluetooth headset or by saying your
magic word.
To voice dial from the phone
1 From standby, press and hold one of
the volume keys.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
To voice dial with a handsfree
1 From standby, press and hold the
handsfree button, or press the
Bluetooth™ headset button.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.