3 using the product, 1 plug & play feature, Using the product – Samsung SyncMaster XL2270HD User Manual
Page 27: Plug & play feature -1, 3using the product
Using the Product
3-1
3
Using the Product
3-1
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the [POWER
] button on the remote control.
•
You can also use the [
] button on the TV.
•
The message
2. Press the [
] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [
] button to confirm your
choice.
3. Press the ◄ or ► button to select
] button.I
•
We recommend setting the TV to
•
mode and you want to return to
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
4. Press the [
] button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [
] button to confirm your
choice.
5. Press the ▲ or ▼ button to select
] button.
•
•
In Cable mode, you can select the correct signal source among
pressing the ▲, ▼, ◄ or ► button, then press the [
] button. If you have Digital cable, select the cable system
signal source for both Analogue and Digital. Contact your local cable company to identify the type of cable system
that exists in your particular area.
6. Press the ▲ or ▼ button to select the channel source to memorise. Press the [
] button to select
•
When setting the antenna source to
search. For more information, refer to
•
•
•
•
The channel search will start and end automatically.
•
Press the [
] button at any time to interrupt the memorisation process.
•
After all the available channels are stored, the message Set the
7. Press the [
] button.
Press the ▲ or ▼ button to select
] button.
•
If you select
•
If you have received a digital signal, the time will be set automatically. If not, select