Samsung HT-DS1000 EN - Manual (Page 21)

20
CONNECTIONS
• If you connect the HDMI and Component outputs (P
R
, P
B
, Y) at the same time, the Component output
resolution changes automatically to the designated HDMI resolution.
Example: If the TV connected to HDMI can only support up to 480p, the HDMI and Component outputs are
all converted to 480p, even if you select the resolution switch to 1080i.
• Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can
enhance a 480i DVD resolution output to 480p/720p/1080i.
• You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has
an HDMI Video/Audio Input jack, output is automatically converted to the resolution of 1080i.)
• Audio will not be output if decoder is not embedded in TV during 5.1 channel disk playback.
• Component output will give video in ‘480P’ mode only during DVD disc playback applied with Macrovision.
• Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using
HDMI only, it can output 480P/720P/1080i, but is limited to 480p only if you are using component.
• See your TV owner's manual for more information on how to select the TV's Video Input source.
Note
Connect if the TV has an HDMI Video/Audio In jack.
Connect the HDMI Video/Audio Out to
the HDMI Video/Audio Input on the TV.
1
Set the Video Input source on your TV
to the corresponding HDMI output on
your Home Theater.
2
Method 3
When you connect to HDMI Video/Audio
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video and audio signals digitally without the process of
converting to analog. You can get sharper digital pictures by connecting the video to the
TV using an HDMI connection cable.
1p~44p(DS1000)-sea 9/15/04 2:43 PM Page 23