Sony MDS-JE480 - Manual (Page 16)

masterpage:Left
(3 column)
filename[D:\Data Folder\sem\4238553111MDSJE480CEL\GB05OPE-CEL.fm]
model name1[MDS-JE480]
[4-238-553-11(1)]
16 GB
Playing an MD (continued)
Other Operations
1) Automatic Music Sensor
2) When you locate a point while monitoring the
sound.
3) When you locate by observing the time
indication.
Tips
• The MDLP indicator lights up when you select a
track recorded in LP2 or LP4 Stereo mode.
• When “– Over –” appears in the display, the MD has
reached the end while you’re pressing M. Turn
AMS counterclockwise (or press .) or press m
to go back.
Playing a track by entering the track
number
Press the number button(s) on the remote
to enter the track number of the track you
want to play.
To enter a track number over 10
1 Press >10.
“-” equal to the number of digits for the number
of tracks recorded on the MD flashes.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To select track number 30 on an MD recorded
with 50 tracks, press >10, then 3 and 10/0.
• To select track number 30 on an MD recorded
with 200 tracks, press >10, then 10/0, 3 and 10/0.
Using the MD display
Press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly.
The display changes cyclically as follows:
During playing
Track number and elapsed time of the current
track
t Track number and remaining time of
the current track t Remaining time of all
recorded tracks t Track name 1)
Tip
To check the track name during playing (only when
the track name is recorded)
, press SCROLL on the
remote.
The track name appears and scrolls. While the track
name is scrolling, press the button again to pause
scrolling, and again to continue scrolling.
In stop mode
Total number of tracks and total recorded time
t Remaining recordable time
2) on the MD
(recordable MDs only) t Disc name 1)
1) “No Name” appears when the disc or track has no
name.
2) Time shown in the display differs depending on
the setting of REC MODE.
You can pick out the tracks that you like and
specify the playing order in a programme
containing up to 25 tracks.
1
While the deck is stopped, press PLAY
MODE repeatedly until “PGM” lights up
in the display.
2
Turn AMS (or press ./>
repeatedly) until the track number you
want to add to the programme appears
(or use the number button(s) on the
remote to enter the track directly), then
press YES or PUSH ENTER.
“Step X (X: number of the entered tracks)”
appears, followed by total playing time of
the programme.
To Do this
Stop play Press x.
Pause play Press X.
Resume play
after pausing Press H or X.
Go to the next or
a succeeding
track during play Turn AMS 1) clockwise (or press
> repeatedly).
Go to a
preceding track
during play Turn AMS counterclockwise (or
press . repeatedly).
Go to the
beginning of the
current track
during play Turn AMS counterclockwise (or
press . once).
Go to a specific
track while the
deck is stopped Turn AMS (or press ./>
repeatedly) until the track number
you want to go to flashes in the
display, then press PUSH ENTER
or H.
Find a point in a
track Press down m/M during play 2)
or play pause 3) . Release it when
you reach the desired point.
Eject the MD Press EJECT A after stopping
play.
Creating your own
programme
— Programme Play