Sony LMD-1950MD - Manual (Page 21)

Adjustment Using the Menus
21
Scan mode image
*1 The image illustrated shows the input signal by
broken line and the efficient picture size by the solid
line.
*2 NORMAL: 7% over scan
OVER: 20% over scan
*3 –3% under scan
SCAN Sets the scan size of the picture.
Select from among “NORMAL”,
“UNDER”, “OVER”, “FULL”,
“ZOOM” and “NATIVE (1080I and
720P only)” (see “Scan mode
image” on page 21).
Note
When inputting the 1035/60I
signal, the signal format is
displayed as 1080/60I on the
screen. A slightly squashed picture
is displayed at a little lower
position, because the picture is
displayed in 1035/1080 picture
ratio on a 16:9 screen. Adjust the
position to the center using the
SHIFT V setting (on page 22).
PIC DELAY MIN Selects to set the delay by the
picture processing to the minimum
level when the NTSC, PAL, 480/
60I, 575/50I or 1080I signal is
input.
• 0: Mode for giving precedence
to the picture quality
(recommended mode). This is a
mode suitable for an animation
and a still picture. It takes
longer than “1” or “2” for
processing the picture.
• 1: The processing time is short
and this is a mode suitable for an
animation.
• 2: The processing time is short
and this is a mode suitable for a
still picture.
Submenu Setting
Input
NORMAL/
OVER
SCAN
*2
UNDER
SCAN
*3
FULL
ZOOM
–
NATIVE
(1080I)
–
NATIVE
(720P)
–
4
3
1 6
9
Im
ag
e
d
is
p
la
yed
*1
4
3 9
1 6
3
4
9
1 6
3
4
9
1 6
9(3)
1 6
1 2 ( 4 )
1 9 2 0
1 2 8 0
1080 1024
1 2 8 0
720