SMC Networks Sunny Mini Central SMC 5000A User Manual
Page 84
Technical Data
SMA
Technologie AG
Page 84
SMC50A_60A-IEN073320
Installation Guide
Fac-Pderating
Frequency-dependent output limitation.
Fac-Start delta
For setting the frequency-dependent output derating in the operating
mode "Off Grid". Further information on this topic can be found in
the Sunny Island operating manual.
Fac-Tavg
Averaging time of grid frequency measurement.
Fan-Test
By setting the "Fan-Test" parameter to "1" you can check
functionality of the fan.
Hardware-BFS
Hardware version of the operation control unit (BFR)
h_Total
Total hours of operation for the inverter. This change may be
necessary when you exchange your Sunny Mini Central and want
to use the data from the old device.
I-NiTest
Setting the impulse for impedance monitoring.
This parameter only functions when the Sunny Mini Central is
deactivated (disconnected on the AC side) or in "Stopp" mode.
Inst.-Code
Parameters for grid monitoring can only be changed after entering
the SMA grid guard password.
KI-Wind-Reg
Control factors in Turbine mode. Further information on this topic can
be found in the Windy Boy instruction manuals.
KP-Wind-Reg
LDVtgC
Compensation for the voltage drop in the cabling.
With this parameter, the voltage drop between the inverter and the
grid connection point is taken into account. The 10-minute average
voltage at the inverter connection must not exceed the sum of
ACVtgRPro plus LDVtgC. The parameter LDVtgC is preset to 0 V for
Germany. In grid areas in which the additional voltage rise
protection (see parameter ACVtgRPro) is not required, the
parameter LDVtgC is preset to 50 V. Thus, the voltage rise protection
is deactivated for these grid areas (253 V + 50 V = 303 V) and only
the fast cut-off via the Uac-Max parameter intervenes.
Plimit
Upper limit for AC output power.
Pmax
Output limitation of the inverter.
P-Wind-Mid
Parameters for adjusting the inverter in Turbine mode. Further
information on this topic can be found in the Windy Boy instruction
manuals.
P-Wind-Ramp
Name
Explanation