English - 9, Sleep timer, Timer / timer / timer – Samsung ML 7000 User Manual
Page 31
English - 9
Time Zone
Select your time zone.
This function is only available when
Clock Mode is set to Auto.
DST (Daylight Saving Time) → Off / On / Auto
Switches the Daylight Saving Time function on or off.
This function is only available when
Clock Mode is set to Auto.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180
minutes).
Press the
TOOLS button to display the Tools menu. You can also set the sleep timer by
selecting
Tools → Sleep Timer.
To cancel the
Sleep Timer function, select Off.
Timer / Timer / Timer
Three different on / off timer settings can be made.
You must set the clock first.
On Time
Set the hour, minute, am/pm, and activate / inactivate.
(To activate the timer with the setting you’ve chosen, set to
Activate.)
Off Time
Set the hour, minute, am/pm, and activate / inactivate.
(To activate the timer with the setting you’ve chosen, set to
Activate.)
Volume
Set the desired volume level.
Source → TV / USB / TV Memory
You can select the
TV, TV Memory or USB device content to be played when the TV turns on automatically. Select TV, TV
Memory or USB. (Make sure that an USB device is connected to your TV.)
When there is only one photo file in the
USB or the TV Memory, the Slide Show will not play.
Antenna (when Source is set to TV)
Select Air or Cable.
Channel (when Source is set to TV)
Select the desired channel.
Contents (when Source is set to USB or TV Memory)
You can select a folder on the USB Device/TV Memory with music or photo files to be played when the TV turns on automatically.
If the folder name is too long, the folder can not be selected.
If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.
Repeat
Select
Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
When
Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the
desired day and the c mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned
on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for
too long time.
■
N
■
N
❑
T
N
❑
■
■
■
■
N
■
■
■
N
N
■
N
N
N
On Time
L Move U Adjust E Enter R Return
Timer 1
Off Time
Volume
00
00
10
Source
Antenna
Channel
TV
Air
0
Repeat
Once
Sun Mon Tue Wed Thu Fri Sat
00
am
Inactivate
00
am
Inactivate
[7000-SA]BN68-01988C-Eng.indb 29
2009-03-31 �� 8:03:35