beautypg.com

Sony PX35 User Manual

Page 46

background image

GB

46

Specifications

INPUT B

Analog RGB: HD D-sub15-pin

(female)
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync: 1 Vp-p ±2 dB sync
negative (75 ohms terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
SYNC/HD:
Composite sync input: 1-5 Vp-p
high impedance, positive/
negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD:
Vertical sync input: 1-5 Vp-p
high impedance, positive/
negative
AUDIO: Stereo minijack
(shared by INPUT B and C)
500 mVrms, impedance more
than 47 kilohms

INPUT C

Digital RGB: DVI-D (TM-DS)
AUDIO: Stereo minijack

(shared by INPUT B and C)
500 mVrms, impedance more
than 47 kilohms

INPUT D

Analog RGB/component: 5BNC

(female)
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
SYNC/HD:
Composite sync input: 1-5 Vp-p
high impedance, positive/
negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD:
Vertical sync input: 1-5 Vp-p
high impedance, positive/
negative
AUDIO: Stereo minijack
500 mVrms, impedance more
than 47 kilohms

OUTPUT

MONITOR OUT: HD D-sub

15-pin (female)

R, G, B: Gain Unity

: 75 ohms

SYNC/HD,VD: 4 Vp-p (open),

1 Vp-p (75 ohms)

*DIGITAL RGB signal is not

output from MONITOR OUT
terminal.

AUDIO OUT (variable out):

Stereo minijack
max. 1 Vrms, When an input
signal is 500 mVrms,
impedance less than 5 kilohms

USB

Up (female) × 1

REMOTE

RS-232C: D-sub 9 pin

CONTROL S IN/PLUG IN
POWER

Stereo minijack

ETHER

RJ-45: 10BASE-T/100BASE-TX

Safety regulations

UL60950, cUL (CSA No. 60950),

FCC Class A, IC Class A,
NEMKO (EN60950), CE
(LVD, EMC), C-Tick

Laser

Laser type

Class 2

Wavelength

645 nm

Output

1 mW

General

Dimensions

420

Ч

115

Ч

316 mm

(16

5

/

8

Ч

4

5

/

8

Ч

12

1

/

2

inches)

(w/h/d) (without the projection
parts)

Mass

Approx. 7.5 kg (16 lb 2 oz)

Power requirements

AC 100 to 240 V, 1.9–0.8A,

50/60 Hz

Power consumption

Max. 365 W

in standby mode: 6W (when
network function is operating)

Heat dissipation

1,246 BTU

Operating temperature

0°C to 35°C (32°F to 95°F)

Operating humidity

35% to 85% (no condensation)

Storage temperature

–20°C to 60°C (–4°F to 140°F)

Storage humidity

10% to 90%

Supplied accessories

Remote Commander (1)
Size AA (R6) batteries (2)
HD D-sub 15-pin cable (2 m) (1)

(1-791-992-31)

USB cable A type - B type (1)

(1-790-081-31)

Lens cap (1)