Sharp UX-305 - Manual (Page 84)

3
Enter the number of the receiving
machine using one of the following
methods:
••
Press a Rapid Key.
••
Press the SPEED DIAL key and
enter a Speed Dial number.
••
Enter a full telephone number by
pressing the number keys.
4
Press the START/MEMORY key if
you entered a Speed Dial number or a
full number.
••
The document will be scanned and
stored in memory. Your fax will
then dial the receiving machine and
transmit the document (redialling
will be done automatically if
necessary).
START/MEMORY
01 02 03
(Example)
If the memory becomes full...
If the memory becomes full while the document is being scanned,
MEMORY IS FULL will appear in the display.
♦
Press the START/MEMORY key if you want to transmit the
pages which have been stored up to that point in memory. The
remaining pages will be ejected from the feeder. After
transmission, the memory will be cleared and you can transmit the
remaining pages. You will also need to transmit the page which
was being scanned when the memory filled up.
♦
Press the STOP key if you want to cancel the entire transmission.
Sending Documents From Memory
82