Sharp UX-305 - Manual (Page 73)

3
Press a number from 1 to 3 to select the ring pattern below that
matches your second number’s ring pattern. Or, press 4 to have your
fax automatically answer your normal telephone number. Press 5 to
turn off the distinctive ring function.
RING PATTERN 1: Two short rings.
RING PATTERN 2: One short, one long, and one short ring.
RING PATTERN 3: Two short rings and one long ring.
STANDARD RING: Your standard (normal) ring pattern.
OFF SETTING: Turn distinctive ring off.
The display will show:
1
3
2
4
5
FAX SIGNAL RX
4
Press the STOP key. STOP
5
Set the reception mode to FAX.
When using distinctive ring, you must set the reception mode of your
fax to FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that
other devices on the same line will also ring until your fax answers. If
one of your other numbers is dialed, the fax will ring; however, it will
not answer.
Note: If you are using an answering machine with your distinctive ring
service, the answering machine must be connected to a separate wall jack.
Do not connect it directly to your fax.
RECEPTION
MODE
FAX TEL
A.M.
7.
S
p
eci
a
l
Func
ti
on
s
Distinctive Ring
71