Sharp UX-305 - Manual (Page 68)

4
Press 1 to select SET. (To clear a
previously programmed area code,
press 2 and go to Step 7.)
The display will show:
2 1
SET CLEAR
or
ENTER AREA CODE
5
Enter the three digits of your area code.
6
Press the START/MEMORY key to
store your area code.
The display will show:
(Example)
START/MEMORY
COVER SHEET
7
Press the STOP key to return to the
date and time display.
How Caller ID operates
When you receive a call, the name and phone number of the caller will
alternately appear in the display, beginning just before the second ring.
The information will continue to be displayed until you pick up the
handset, or until the fax answers automatically if it is in FAX mode.
Note: Some caller ID services may not provide the name of the caller. In
this case, only the phone number will appear.
Display example:
STOP
DOE JOHN 444-555-6666
Caller’s name Caller’s number
5 0 2
Caller ID
66