Sharp UX-305 - Manual (Page 123)

UX305U-QRQR
QUICK REFERENCE GUIDE
RT
INSTALLATION
1. Connect the handset as shown.
2. Plug the power cord into a grounded, 120 V out-
let.
3. Plug one end of the telephone line into the TEL.
LINE jack on the rear of the fax, and the other
end into your telephone wall jack.
TEL.
SET
TEL.
LINE
1
3
2
Connecting an answering machine and/or
extension telephone
1. Remove the seal covering the TEL. SET jack
on the rear of the fax. Connect an extension
telephone or answering machine to the
TEL.
SET jack.
2. If desired, connect an extension phone to the
answering machine.
SPEED DIAL
REDIAL
HOLD/SEARCH
SPEAKER
ABC DEF
JKL MNO GHI
TUV WXYZ PQRS
OPER
ENTERING YOUR
NAME AND NUMBER
1. Press:
OWN NUMBER SET Display shows:
2. Press:
3. Enter your fax number (max. of 20 digits) by
pressing the number keys.
♦
If you make a mistake, press the HOLD/SEARCH
key to move the cursor back to the mistake, then
enter the correct number or letter.
4. Press:
5. Enter your name by pressing the appropriate
number keys as shown below.
♦
To enter two letters in succession that require
the same key, press the
SPEAKER key after
entering the first letter.
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
Deletes highlighted
letter
Upper/lower case
shift key
Moves cursor to the
left.
Moves cursor to the
right.
Press either key one or more times to select
and enter a symbol.
6. When finished, press:
START/MEMORY
STOP
FUNCTION
3
START/MEMORY
START/MEMORY
TEL.
SET
TEL.
LINE
Note: Imaging film and paper must be loaded to
perform the following operation.
121