Siemens CENTRA Behind-the-Ear System - Manual (Page 21)

21
Safety instructions for hearing systems with audio input
The audio input may be connected to line-operated equipment
only if the equipment fulfills the safety requirement IEC 65 /
DIN VDE 0860.
Before the audio shoe can be attached to the hearing system,
the following steps have to be fulfilled:
1. Open the battery compartment.
2. Open the audio shoe cover.
3. Close the battery compartment.
With the audio shoe attached, the battery compartment switch
is disabled and the hearing system can only be switched off
with the push button.
Your hearing instrument specialist can further instruct you on
the use of the audio input, and provide information regarding
audio input accessories such as audio shoes and cords.
Attaching the audio shoe
Slide the audio shoe to the inner side
of the hearing system housing until it
snaps into the end position.
To remove the audio shoe, slide the
audio shoe in the opposite direction.
Removing the audio shoe
Only for CENTRA SP: The audio shoe cover has a
guideway which helps to attach the audio shoe.