Siemens CENTRA Behind-the-Ear System - Manual (Page 19)

19
Using the volume control
All CENTRA hearing systems have manu-
al volume control, except the CENTRA S.
In general, volume control of CENTRA
hearing systems is fully automatic and
there is no need to manually adjust the
volume. Should you prefer manual volu-
me control, however, CENTRA hearing
systems can be programmed for manual
adjustment.
Rotate the wheel
upwards to increase
volume. Rotate it down
to decrease volume.
For manual adjustment, rotate the wheel-shaped volume
control with your index finger to select the desired listening
volume (up for louder, down for softer).
If your hearing system is equipped with a warning tone for
volume control limits, once it is heard, adjusting the volume
control further in that direction will have no effect.
Learning function
CENTRA hearing instruments memorize changes made in
volume control settings. They are evaluated, averaged, and
automatically applied. This means that over time your hea-
ring instrument automatically adapts to your preferences
regarding the volume setting for each program.
If your hearing system has not been programmed for manual
control adjustment, the volume will automatically adjust and
rotating the volume control wheel will have no effect.
Note:
With the ePocket remote control, volume settings can be
adjusted and memorized on all systems.
If you are wearing two hearing instruments, the volume
will be changed on both instruments simultaneously.