Smart Technologies X-Port 20 Switch XP20-2000i User Manual
Page 10
11. Connect the supplied MOD6 cable to the audio amplifier and the X-Port 20 switch.
Supplied MOD6
Cable
12. Swing the Electronics tray back to its original position, and insert the two button head screws
that you removed earlier. Avoid pinching any cables.
13. Connect the supplied three-cable laptop harness to the rear of the 2000i.
BNC x 5 Cable
Red Green Blue H
V
BNC Connectors
Serial Cable
DB9 Connector
3.5 mm Audio
Cable
Audio Amplifier
Connector
Connecting the Laptop Harness to the 2000i
TIP: You may want to bundle the above cables using a supplied tie wrap.
X-Port 20 Switch Installation Guide for the 2000i 99-00486-00 Rev B0
6