Sunfire OLE-2SF - Manual (Page 9)

14. Z•NET/VIA!NET
Switch
You must set this switch to
VIA!NET for use with Sunfire
receivers and processors.
1. System RJ-4 Jack
Connect this jack with Cat- cable
to the TP1 or TP RJ-4 con-
nectors on the rear panel of your
Sunfire receiver or processor.
16. Local IR Port
This port allows the connection of
local IR emitters and IR receivers,
local contact switches etc. See
pages 13–1 for connections.
14 1 16
Rear Panel
9