Connecting a dvd player with a/v connectors – Sony KF-42WE620 User Manual
Page 42
Installing and Connecting the LCD Projection TV
42
KF-42/50WE620
2-108-981-13(1)
Connecting a DVD Player with A/V Connectors
Use this hookup if:
❑
Your DVD player does not have component (Y, P
B
, P
R
) jacks.
Disconnect all power sources before making any connections.
1
Using audio cables, connect the DVD player’s AUDIO OUT jacks to the
LCD projection TV’s AUDIO IN jacks.
2
Using a S VIDEO cable, connect the DVD player’s S VIDEO jack to the
LCD projection TV’s S VIDEO jack.
✍
If your DVD player has video component output connectors: for best
picture quality use the connection described on page 41.
Rear of LCD projection TV
DVD player
Audio cable
(not supplied)
AUDIO-R
(red)
S VIDEO
AUDIO-L
(white)
✍
To take advantage of the wide screen modes, set the TV’s aspect ratio to
16:9 on your DVD player. For details, refer to the operating instructions
supplied with your DVD player.
✍
Use TV/VIDEO on the remote control to switch between the VCR, DVD
player and cable TV inputs.
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.