Sony KF-42WE620 - Manual (Page 14)

Introducing the Sony LCD Projection TV
14
KF-42/50WE620
2-108-981-13(1)
Notes on the LCD
Projection TV To enjoy clear pictures
❑
Be sure not to allow sunlight or light from a lamp to shine directly onto
the screen.
❑ The screen surface is easily scratched. Do not rub, touch, or tap it with a
sharp or abrasive object (see “Cleaning the Screen Surface” below).
On moisture condensation
❑
If your LCD projection TV is moved directly from a cold to a warm
location, is placed in a humid room, or if the room temperature changes
suddenly, the picture may blur or show poor color. This is caused by
moisture condensation on the lenses inside. If this happens, leave the
power on and let the moisture evaporate before using your LCD
projection TV.
When not using the LCD projection TV for a long period of time
❑
Turn off the main power on the front of your LCD projection TV before
going to sleep or going out. Disconnect the AC plug if idle for more than
seven days.
When turning off the power
❑
The fan will continue to blow for about two minutes after turning off the
power on the main unit or the remote control. Allow several minutes
before unplugging from the outlet or switching the breaker off.
Before carrying the LCD projection TV
❑
Disconnect all connections.
Cleaning the Screen
Surface To remove dust on the screen, wipe with a soft cloth.
✍
Do not use any type of abrasive pad, alkaline cleaner, scouring powder,
window cleaners or solvent such as alcohol or benzene. Using these
types of products may damage the screen.
✍
To clean the screen, use the cloth lightly moistened with mild detergent
solution diluted with water. Use gentle pressure when cleaning.