Warning indicators, Stabilizing the projection tv – Sony KL-37W1U User Manual
Page 31
31
GB
Cause
The lamp burns out or the
quality of the lamp is deficient.
The cover of the filter or the
lamp is removed.
The fan for cooling stops.
Internal heat builds up.
Indicator flashing patterns
The B indicator flashes twice then A flashes once.
Flashing continues in this manner.
The B indicator flashes three times then A flashes once.
Flashing continues in this manner.
The B indicator flashes four times then A flashes once.
Flashing continues in this manner.
The B indicator flashes five times then A flashes once.
Flashing continues in this manner.
If the lamp flashes in a way not described above, consult your nearest Sony service center.
A
B
Warning Indicators
When a problem occurs, the indicator flashes as follows.
Attempt the solution recommended for the given problem.
Stabilizing the Projection TV
After setting up, secure the projection TV to a wall, etc., with the supplied brackets, for safety
purposes.
1
Mount the two supplied brackets with the screws to the upper rear side
of the projection TV.
2
Pass a strong cord or a chain through each bracket mounted in 1, and
then secure to a wall or a pillar, etc.
Bracket (supplied)