Sony KL-37W1U - Manual (Page 16)

16
GB
Effect
(See page 17 for more information)
Off: Normal n Dolby n Hall
Choice between different hall effects
Room n Dome n Arena
A: left channel B: right channel Stereo Mono
The selected mode of the A-
µ
-B indicator on the TV lights up.
Less More
A: channel 1 n B: channel 2 n PAP (if PAP is switched on you
can select the PAP sound for the headphones)
Stereo n Mono
Effect
Less More
Darker Brighter
Less More
Greenish Reddish
Softer Sharper
Resets picture to the factory preset levels.
Normal high: obtain a high quality picture
PICTURE
CONTROL
SOUND
CONTROL
Adjusting and Setting the TV Using
the Menu
SOUND CONTROL
Graphic Equalizer
Surround Mode
Hall Effect
(only if “Hall” is on)
Dual Sound
Headphones:
2 Volume
2 Dual Sound
➝
➝
Adjusting the Picture and Sound
Although the picture and sound are adjusted at the factory, you can
adjust them to suit your own taste. You can also select dual sound
(bilingual) programmes when available or adjust the sound for
listening with the headphones. Also you have the possibility to
adjust the sound to your individual taste using the Graphic
Equalizer and special Sound effects.
1 Press (for picture) or (for sound) on the Remote Commander.
or
Press MENU and select the symbol for Picture Control or
Sound Control, then press OK.
The PICTURE CONTROL or SOUND CONTROL menu appears.
(See Fig. 28 or Fig. 29.)
2 Using
>
+ or
?
–, select the item you want to adjust and press OK.
The selected item changes colour. (See Fig. 30.)
3 Adjust the setting with
>
+ or
?
– and press OK.
The cursor appears beside the next item (at the left margin). (See
Fig. 31.)
For the effect of each control, see the table below.
4 Repeat steps 2 and 3 to adjust other items.
5 Press MENU to return to TV picture.
Fig. 28
Fig. 29
Fig. 30
Fig. 31
Select and press OK
2
Dual Sound
Surround-Mode
Grafic Equalizer
SOUND CONTROL
Hall effect
2
Volume
Dual Sound (A)
[ ] Hall
[ ]
[ ]
mono
[ ] mono
Brightness
Colour
Brightness
If you have made a
mistake
Press
≅
to go back to
the previous position.
To go back to the main
menu
Keep pressing
≅
.
Notes
• HUE is only available for
NTSC colour systems.
• Hall Surround is not
available via
headphones.
Note on LINE OUT
The audio level and the
dual sound mode output
from the
>
jack on the
rear correspond to the
HEADPHONES
VOLUME and DUAL
SOUND settings.
When watching a video
input source with
stereo sound
You can select DUAL
SOUND to change the
sound.
PROGR
PROGR
1
1
VTR 1-2-3 MDP
1 2
4 5
3
6
9 8 7
0 C
SAT
+ +
_ _
MENU
+
_
OK
+
_
RM-838
USE MEM
RESET
Effect of each control
PICTURE CONTROL
Contrast
Brightness
Colour
Hue
Sharpness
RESET
Resolution
Select and press OK
Reset
Sharpness
Brightness
Contrast
PICTURE CONTROL
Colour
Resolution (high)