Sony KL-37W1U - Manual (Page 17)

17
GB
Graphic Equalizer
Using this function you can individually adjust the sound by cutting
and boosting selected frequencies. You can also select between
the following modes:
Flat n Pop n Rock n Jazz n Vocal n User
1 Select “Sound Control” in the main menu, then select “Graphic
Equalizer” using
>
+ or
?
– and press OK.
The GRAPHIC EQUALIZER menu appears (See Fig. 32).
2 Press OK. The colour of “Mode” changes. Select the desired
mode with
>
+ or
?
– and press OK.
3 If you want to modify a mode, select the desired bar of a frequency
band using
>
+ or
?
– and press OK. The selected frequency
changes colour. Using
>
+ or
?
– adjust the level of frequency and
press OK. In this way you can adjust all 5 graphic bars.
4 Press MENU to return to the normal TV mode.
Using the Sleep Timer
You can select a time period after which the TV automatically
switches into standby mode.
1 Using
>
+ or
?
– select the symbol t for “Timer” and press OK.
The TIMER menu appears (see Fig. 33).
2 Press OK.
The time period option changes colour.
3 Select the time period with
>
+ or
?
–.
The time period (in minutes) changes as follows:
10 n 20 n 30 n 40 n 50 n 60 n 70 n 80 n 90
4 After selecting the time period, press OK.
The cursor moves back to the left margin and the timer starts
counting.
One minute before the TV switches into standby mode, a message
is displayed on the screen.
GRAPHIC EQUALIZER
Select and press OK
[User] Mode:
+
–
0
100 400 1K 4K 10K
Note: The modifications
made in “USER” mode
will be stored. All other
settings are reset to
factory-set level when
you change to another
mode.
TIMER
To switch off the timer
Select “OFF” in step 3.
To check the
remaining time
Press
∃
.
To go back to the
normal TV picture
Press MENU.
Fig. 32
Fib. 33
TIMER
Select and press OK
Sleep Timer [ ] 10 Min
Flat
Pop
Rock
Jazz
Vocal
User
↑