Sony KL-37W1U - Manual (Page 24)

24
GB
1
PROGR
PROGR
1
1
VTR 1-2-3 MDP
1 2
4 5
3
6
9 8 7
0 C
SAT
+ +
_ _
MENU
+
_
OK
+
_
RM-838
USE MEM
RESET
Input signal
Audio/video input through the 1 connector
Audio/RGB input through the 1 connector
Audio/video input through the 2/ S 2 connector
Audio/S video input through the 2/ S 2 or S 2 connector (4-pin
connector)
Audio/video input through 3 and 3 connector on the front
S video input through the S 3 connector (4-pin connector) at the front
Audio/video input through the 4/ S 4 connector
S video input through the 4 / S 4 or S 4 connector(4-pin connector)
Selecting input with
PROGR +/– or number
buttons
You can preset video
input sources to the
programme positions so
that you can select them
with PROGR +/– or
number buttons. For
details, see “Preset
channels manually” on
page 9.
Selecting Input and Output
This section explains how to view the video input picture (of the
video source connected to your TV), and how to select the output
signal using direct access buttons or the menu system.
Selecting input
Press repeatedly to select the input source.
The symbol of the selected input source will appear.
To go back to the normal TV picture
Press
Ο
.
Input modes
Symbol
1
2
S 2
3
S 3
4
S 4
Selecting the output
The 2 / S 2 connector outputs the source input from the
other connectors.
Press repeatedly to select the output.
The symbol of the selected output source appears.
Output modes
2/
S
2 connector outputs
Audio/video signal from the 1 connector
Audio/video signal from the 2/ S connector
Audio/S video signal from the 2/ S 2 or S 2 connector (4 pin)
Audio/video signal from the 3, 3 connectors
Audio/S video signal from the S 3, 3 connectors
Audio/video signal from the 4/ S 4 connector
Audio/S video signal from the 4/ S 4 or S 4 connector (4 pin)
Audio/video signal from the
)
aerial terminal
Symbol
1
2
2 S
3
3 S
4
4 S
TV
1
You can also select the input mode using the button on the TV.