Sanyo KHS0951 - Manual (Page 7)

24-hour clock with ON/OFF
24-hour OFF Timer.................
1-hour OFF Timer...................
Remote Control Unit (Display)
(1) Operation mode
AUTO.......................................
HEAT........................................
MILD DRY................................
COOL .......................................
(2) Fan speed
AUTO.......................................
HIGH ........................................
MEDIUM..................................
LOW.........................................
(3) Temperature setting
Displayed when setting timer
Displayed when the temperature
setting is at the upper or lower
allowable limit
Displayed when temperature is
shown
Displayed when transmitting data
Displayed when main unit sensor is in use
60 – 86 °F
When set to 82 °F ...........
Current temperature
indication .........................
(4) Timer
(5) NIGHT SETBACK ....................
(6) Confirmation of
transmission ...........................
(7) Flap
Angle indication .....................
Sweep indication....................
ON
OFF
1
HR.
Symbols
7
OI-351-07EG
oi202000
24-hour ON Timer..................
program Timer.......................
“ROOM TEMP” is displayed when the temperature setting has
not been made.
“TEMP” is displayed when setting temperature.