Sanyo KHS0951 - Manual (Page 20)

20
OI-351-20EG
Setting the Timer (continued)
3. How to set the ON time (Example) To start operation at 7:10 am.
Operation Indication
1. Press the Program button ( )
twice.
2. • Press the HH button until AM 7 is
displayed.
• Press the MM button until 10 is
displayed.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the TIMER SELECT button to
set ON time.
The timer indication blinks
and present ON time is shown.
The display will change
automatically back to show the
present time after 10 sec.
The present time is displayed.
The present time and are
displayed.
4. How to set a program
for daily ON/OFF
operation (Example) To start operation at 7:10 am. and stop the air conditioner at
11:30 pm.
1. Set the timer ON/OFF times as
shown in 2-1, 2 and 3-1, 2.
2. Press the ON/OFF button to start the
air conditioner.
3. Press the TIMER SELECT button to
set the ON/OFF combination timer.
NOTE When the Daily ON/OFF program is set to start the air conditioner
before the ON time setting, the
indications appear on the
display.
On the other hand, when the Daily ON/OFF program is set to start the
air conditioner after the ON time setting, the
indications
appear on the display. Thus, these indications show the timer program
which will operate next.
The present time PM 9:10 and
are displayed.
OFF
time
Present
time
ON
time
Programed
daily
ON/OFF
7:10 am 11:30 pm
ON OFF
NOTE You can check the timer ON/OFF times after you have set them by
pressing the PROGRAM button.