Shindaiwa DH212 - Manual (Page 27)

27
ENGLISH
MOdel ------------------------------------------dh212
Length ---------------------------------------------1,040 mm (41.0 in.)
Width ----------------------------------------------240 mm (9.45 in.)
Height ---------------------------------------------200 mm (7.87 in.)
Weight, dry ---------------------------------------4.98 kg (11.0 lb.)
Type of Engine -----------------------------------Air cooled, two-stroke, single cylinder, gasoline engine
Displacement -------------------------------------21.2 cc (1.29 cu.in.)
Bore ------------------------------------------------32.2 mm (1.27 in.)
Stroke ----------------------------------------------26.0 mm (1.02 in.)
Exhaust System ----------------------------------Spark Arrestor Muffler w/catalyst
Carburetor-----------------------------------------Zama w/purge
Ignition System ----------------------------------Flywheel Magneto, Capacitor discharge ignition
Spark Plug ----------------------------------------BPMR-8Y (Gap 0.65 mm (0.026 in.)
Fuel ------------------------------------------------Mixed Fuel - gasoline and oil
Fuel/Oil Ratio ------------------------------------50 : 1 two-stroke, air-cooled engine oil.
Gasoline -------------------------------------------Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more
than 10% ethyl alcohol or 15% MTBE. Do not use alternative fuels such as
E-20 or E-85.
Oil --------------------------------------------------Shindaiwa One Premium Universal 2-Stroke Oil
Fuel Tank Capacity ------------------------------0.5 lit. (16.9 fl. oz)
Starter System ------------------------------------Automatic Recoil Starter
Clutch----------------------------------------------Centrifugal Type
Gear Case Ratio ----------------------------------5.88:1
Cutter ----------------------------------------------Double Reciprocating Blade, Double Edge
Length -------------------------------------------490 mm (19.3 in.)
Pitch ---------------------------------------------35 mm (1.38 in.)
Height -------------------------------------------21 mm (0.83 in.)
Maximum Diameter Cut
Soft Material ------------------------------------25.4 mm (1 in.)
Woody Material ---------------------------------13 mm (1/2 in.)
Idle Speed (RPM) --------------------------------2,750 - 3,250
Clutch Engagement Speed (RPM) -------------3,700 - 4,300
Wide Open Throttle (RPM) --------------------9,500 - 11,500
s
pecIfIcatIons
IMPORTANT This spark ignition system complies with Canadian ICES-002.