Samsung DLP TV SP46L6HX - Manual (Page 56)

English - 56
Setting Up Your Remote Control
This TV’s remote control can operate VCR, CATV , DVD, or
Set-top box (STB), in addition to controlling the TV.
➢
The remote control might not be compatible with all DVD
Players, VCRs and Cable boxes.
1 Turn off your VCR, Cable box, DVD or STB.
2 Press the SELECT button. Mode is changed whenever SELECT
button is pressed.
3 Press the POWER ( ) button on the remote control.
The component you select should turn on. If it turns on, your remote
control is now set correctly.
4 Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate your VCR,
Cable box, DVD or STB.
➢
When your remote control is in the VCR, CATV, DVD or
STB mode, the volume buttons still control your television’s
volume.
➢
To program the cable receiver controls:
◆ Press the SELECT button to select CATV.
◆ Point the remote control at the cable receiver and press
the SET button. Then press the company code number(s)
for the component in page 58.
Ex) If the component is manufactured by Oak, press 026.
➢
To program the VCR controls:
◆ Press the SELECT button to select VCR.
◆ Point the remote control at the VCR and press the SET.
button. Then press the company code number(s) for the
component in page 57 or 58.
➢
To program the DVD controls:
◆ Press the SELECT button to select DVD.
◆ Point the remote control at the DVD and press the SET.
button. Then press the company code number(s) for the
component in page 58.
VCR
BP68-00478E-00Eng_0826 8/26/05 6:08 PM Page 56