Schumacher SE-4225 - Manual (Page 11)

• 7 •
Attach the Foot: 10.2 Remove the charger from the packing materials and
place upside down on a flat surface. Attach the foot and secure it with the
four ¼-20 thread cutting screws provided.
Assemble the Wheels and Axle 10.3 : Hold the axle upright on the floor or
work surface. Then, using a hammer, tap one of the axle caps onto the top
end of the axle. Be sure to tap the axle cap on straight. Slide both wheels
onto the axle with the recessed hubs facing out as shown. Install the
second axle cap.