Event list, Usb device setting – SVAT Electronics CLEARVU2 User Manual
Page 20
SVAT ELECTRONICS
now you can see
CLEARVU2
17
Buzzer Time
Press
►/4 to adjust the amount of time in seconds (0-30 sec) that alerts will sound. You can also set the alert to
continuous or off.
Event List
Time Search
Use this option to search the DVR for a specific recorded event by time.
1. Use the
▲/1▼/3 buttons to select the Year/Month/Day and Hour/Minute/Second, and press ►/4 to change
the values.
2. Press
to start playing the video footage at the specified time (if it exists).
3. “BEGIN TIME” and “END TIME” indicate the time/date range that recorded footage exists.
Event Search
Use this option to browse all recorded clips by event. The three event types are Time (Time Recording [T]), Alarm (Motion
Recording [A]), and Mix (Time/Motion Recording [M]).
USB Device Setting
Before entering the USB Device Setting
menu, you must insert a USB flash drive
into the USB port on the back of the DVR.