Camera setup – SVAT Electronics CLEARVU2 User Manual
Page 16
SVAT ELECTRONICS
now you can see
CLEARVU2
13
Camera Setup
Camera Enable
This option allows you to enable/disable camera channels. Use the
▲/1▼/3 buttons to select the camera channel
you want to enable/disable. Then press the
►/4 button to enable or disable that camera channel.
Camera Title
This option allows you to enable/disable the camera title display. If you use custom camera titles, you must enable
camera title display for them to appear. Use the
▲/1 &▼/3 buttons to select the camera title you want to enable/
disable. Then press the
►/4 button to enable or disable that camera title.
Camera Setting
This submenu allows you to adjust options
for each camera:
1. Camera Select - Use the
►/4 to select the
camera channel to which you would like to
make changes (CH 1-4).
2. Record Enable - Press
►/4 to switch
recording on/off for the selected camera
channel.
3. Motion Detection - Press
►/4 to switch
motion detection on/off for the selected
camera channel.