Samsung SWL-2210M - Manual (Page 43)

43
select the adapter and click on Remove. Restart your computer after uninstalling
the driver to make the changes effective. (See the Adapter Removal in section 3.8)
7. Of the icons displayed on the right bottom of desktop, click on icon stated
Wireless Network Connection.
8. When you are using DHCP, just select the AP that you want to connect in the
Connect to Wireless Network above.
9. To manually set your IP address, WEP and some other configuration, click on
Advanced of the above picutre and then click Configure Available networks on
the Wireless Networks Tab . Set the SSID and parameters to be needed to modify
and then clicking on OK. The AP that you selected will be displayed on the
Preferred Networks .