4 installation procedure of windows nt4.0 – Samsung SWL-2210M User Manual
Page 27

27
3.4 Installation Procedure of Windows NT4.0
Please follow the following steps one by one to install the
MiniPCI/PCI Card
successfully.
1. Insert
SAMSUNG 11Mbps WLAN MiniPCI/PCI Card
into the slot and power on your
computer.
2. Windows NT will start in your computer and follow the below procedures.
Notice that there’s some difference between When Windows NT networking is not
installed and When Windows NT networking is already installed .
1. Since there is no Windows NT networking installed yet, you should install your
driver manually. To do so, click on Start in task bar, go to Settings and then to
Control Panel.
2. Under Control Panel, double click on Network icon.
3. Since there is no Windows NT networking installed yet, you maybe asked if you
want to install NT networking first. Click on Yes and then Network Setup Wizard
will be start. Select ‘Wired to the network’ and click on ‘Next’. In ‘network setup
wizard’ box, click on ‘Select from list button’.