Samsung RS267TD** - Manual (Page 18)

18_ setting up
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on levelling the refrigerator.
When the door of the freezer is higher
than the fridge
Open the doors and adjust them, one at a time, as follows:
1. Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .
When you release the nut 1 , make sure that you use the hex wrench provided 3 to loosen the
bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut
1 with your fingers.
2. Adjust the height difference between the doors by turning the bolt 2 clockwise or counter
clockwise .
When you turn clockwise , the door will move up.
3. After adjusting the doors, turn the nut 1 clockwise until it reaches the lower end of the
bolt, then tighten the bolt again with the wrench 3 to fix the nut in place 1 .
If you do not secure the nut firmly, the bolt may release.
setting up your side-by-side refrigerator
3
2
1
Wrench
Bolt
Nut
Adjustment part
3
2
1
Wrench
Bolt
Nut
3
2
Wrench
Bolt