Samsung RS267TD** - Manual (Page 15)

setting up _15
Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then
disconnect the wires 2 .
2. Remove hinge bolts 3 with a 10mm Socket Wrench and a ground screw 4 counter-clockwise,
and take off the upper hinge 5 in the direction of the arrow. Be careful when removing the door
to ensure that it does not fall on you.
3. Open the Freezer door before lifting it up. Remove the door from the lower hinge 6 by carefully
lifting the door 7 .
4. Remove the lower hinge 8 from the lower hinge bracket 9 by lifting the lower hinge in the
direction of the arrow.
Make sure to put the water line through the lower hinge before assembling it.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order.
CAUTION
CAUTION
01 SETTING UP
2
1
8
9
4
5
3
7
6