Sharp XG-P20XU - Manual (Page 40)

E-39
Operation Buttons
Selecting the Input Signal Source
Using the Operation Buttons
Press INPUT again to change the mode.
You can use these tools by accessing the “Button Assign”
list on your GyroRemote. Choose popup list “5/5”. (See
page
33 .)
• When no signal is received, “NO SIGNAL” will be displayed.
When a signal that the projector is not preset to receive is
received, “NOT REG.” will be displayed.
INPUT 1 Mode INPUT 2 Mode INPUT 3 Mode
INPUT 4 Mode INPUT 5 Mode
On-screen Display
Projector GyroRemote
INPUT
Press VOLUME
؁/؀ to adjust the volume.
Adjusting the Volume
On-screen Display
Projector GyroRemote
Muting the Sound
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
You can use this tool by accessing the “Button Assign”
list on your GyroRemote. Choose popup list “2/5” and
press
Function (3). (See page 33 .)
Projector
MUTE
On-screen Display
VOLUME