Samsung SHR-9716 - Manual (Page 76)

72_ appendix
Connecting to DVR Server
1. Click on the button to add a remote DVR server
to the Connection list or to connect to a remote
DVR server. Click on the Connect button to launch
the Server Connection window.
2. Select the DVR you want to connect to from the
server list.
3. Click on the Connect button to open a connection
with the selected DVR server. Here, the DVR
server will not be displayed on the server list if a
connection cannot be established due to improper
server connection settings, or the DVR server being
powered off.
Disconnecting from DVR Server
1. Click on the button and then the Disconnect
button.
2. From the Server Disconnection window, select the
DVR server you wish to disconnect.
3. Click on the Disconnect button to sever the
connection with the selected DVR server.
4. Click on the Exit button to close the Server
Disconnection window.
Exit SPR Smart Watch
1. Click on the button and then click the Exit
button to exit to Windows.
SPR-9816-9716.indb 72 2008-07-03 오후 2:48:40