SeaLand 1 2500 Series - Manual (Page 4)

4
INSTALLATION (cont’d)
CONNECTING SANITATION HOSE
Position hose clamp screws 180°
apart from each other and tighten
clamps.
1. Route the sanitation hose from the toilet outlet
to to the cassette tank inlet (see tips for routing
hose on next page).
2. Connect 1 1/2-in. (38 mm) ID sanitation hose to
the white adapter fitting of the elbow assembly
(see tips for connecting hose on next page).
After pushing hose and fitting together, use two
hose clamps to tighten the connection.
3. Push the black adapter fitting of the elbow
assembly into the cassette vacuum tank.
Turn adapter and hose to best angle.
Dometic recommends that each hose
connection be secured with two hose clamps
to prevent any leaks.
Maximum length of hose
between toilet and cassette is
20 ft. (6 m).
B. Maximum difference in height
from toilet to cassette is 3 ft.
(1 m).
A.
B
A
INSERTING CASSETTE TANK
Place the cassette tank on the dock-
ing platform, then push the cassette
tank toward the back of the docking
platform until the latch engages (A).
A