Speco Technologies D8RS - Manual (Page 27)

27
SENSITIVITY Control the motion sensitivity from 1 to 9.
(9 – Highest sensitivity, 1 – Lowest sensitivity)
KEY TONE Enable/disable key tone.
REMOTE
CONTROL ID
Set the remote control ID.
1. Select ID.
2. Input the remote control ID number.
3. An icon will indicate on the Live Screen if the remote control ID is
synchronized.
The options are from 0 to 99
SENSOR Select the type of each sensor.
Option is Off, Normal Open or Normal Close.
4-4-1. Alarm-Out
Figure 4.4.2. ALARM-OUT Setup Screen
Table 4.4.2. Item for ALARM-OUT Setup Screen
Item Description
ALARM OUT Only one Alarm-out is available.
SENSOR IN Sensor input from 1 to 4.
MOTION ON Camera motion detection from 1 to 4.
VIDEO LOSS ON Camera video loss detection from 1 to 4.
ALARM DURATION Set alarm dwell time from 5 to 60 seconds.
ERROR ALARM Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.