Speco Technologies D8RS - Manual (Page 23)

23
ID: Enter the appropriate mail server ID.
PASSWORD: Enter the appropriate mail server PASSWORD.
MAIL FROM: To set the email address sent to the destination host.
UNIT NAME Name the DVR (e.g. Factory)
This feature is to identify the name of the DVR under the same network.
4-3. Setup
– RECORD Mode
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.
Figure 4.3.1. RECORD Setup Screen
Table 4.3.1. Menu Items in RECORD Setup Screen
Menu Item Description
SITE Select a channel for applying the following settings using the mouse or the
control button on the remote control. To change the values of all channels,
take the following steps.
Select the following to change the values of all channels.