Sony CMT-ED2 - Manual (Page 16)

16
To Do this
Turn off the radio Press ?/1.
Adjust the volume Press VOL +/–.
To tune in a non-preset radio
station
In step 2, press TUNING MODE repeatedly until
“MANUAL” appears, then press +/– repeatedly to
tune in the desired station (Manual Tuning).
Tips
• If you press TUNER/BAND when the power is off,
the system automatically turns on and tunes in the
station last received (One Touch Play).
• To switch to the radio while listening to another
source, press TUNER/BAND (Automatic Source
Selection).
• If there is static during an FM broadcast, press
STEREO/MONO until “MONO” appears. The
broadcast will no longer be in stereo, but the
reception will improve. Press this button again to
restore the broadcast to stereo.
• For better reception, remove the rear cover and
place the antenna outside (see “To remove the AM
antenna” on page 6).
Listening to the radio
— Preset Tuning
Presetting radio stations in the system’s memory
in advance makes it easy to tune in those stations
later (see “Step 3: Presetting radio stations” on
page 9).
To turn on the system, press ?/1.
STEREO/
MONO
VOL
+
/
–
3
2
1
1
Press TUNER/BAND repeatedly until
“FM” or “AM” appears.
2
Press TUNING MODE repeatedly until
“PRESET” appears.
3
Press +/– repeatedly to display the
preset number of the desired station.
3 1 0 0 5
Frequency
Preset
number
?/1
(Power)