Sony CMT-ED2 User Manual

Page 12

Text mode
Original mode

AM antenna

For the AM antenna, use a 6- to 15-meter (20- to
50-foot), horizontally extended insulated wire,
with one end connected to the AM ANTENNA
terminals as shown below. Leave the supplied AM
bar antenna connected.

Important

If you connect an external antenna, connect a ground
wire to the U terminal with a screw clamp. To avoid
causing a gas explosion, do not connect the ground
wire to a gas pipe.

Connecting optional components
(continued)

Insulated wire
(not supplied)

AM bar antenna

Screw
clamp

Ground wire (not supplied)

This manual is related to the following products:

CMT-ED2U