SMSC USB2524 - Manual (Page 55)

USB MultiSwitch TM Hub
Datasheet
SMSC USB2524 55 Revision 1.91 (08-22-07)
DATASHEET
Note 11.1 Output leakage is measured with the current pins in high impedance.
Note 11.2 See USB 2.0 Specification for USB DC electrical characteristics.
Note 11.3 RBIAS is a 3.3V tolerant analog pin.
CAPACITANCE T
A
= 25°C; fc = 1MHz; V
DDIO
= 3.3V
Power Sequencing
There are no power supply sequence restrictions for the Hub. The order in which power supplies
power-up and power-down is implementation dependent.
Supply Current
Configured
(2 upstream Full-Speed
Hosts)
1 Port
2 Ports
3 Ports
4 Ports I
FCC1
I
FCC2
I
FCC3
I
FCC4
182
182
182
182 mA
mA
mA
mA
Total from all supplies
Supply Current
Suspend I
CSBY
272
μA
Total from all supplies.
Supply Current
Reset I
CRST
73
μA
Total from all supplies.
LIMITS
PARAMETER SYMBOL MIN TYP MAX UNIT TEST CONDITION
Clock Input
Capacitance C
IN
2 pF All pins except USB pins (and pins under
test tied to AC ground)
Input Capacitance C
IN
8 pF
Output Capacitance C
OUT
12 pF
Table 11.1 DC Electrical Characteristics (continued)
PARAMETER SYMBOL MIN TYP MAX UNITS COMMENTS