beautypg.com

Silvercrest KH 2029 User Manual

Page 12

background image

- 10 -

Interrupting the alarm

Press the

SNOOZE

button to interrupt the alarm

for 10 minutes.

Set snooze time

Press the

MODE

button seven times; the screen

displays the snooze time set
(default is SNO10).

Use the

UP

and

DOWN

buttons to set the snooze

time to a time between 1 and 59 minutes.

Turning off the alarm function

Press the

VOL.+/AL–1

or

VOL.–/AL–2

button until

the relevant alarm symbols disappear from
the screen.

Stop watch function

The stop watch function is only available when the
radio is switched off.

Press and hold down the

PAGE

button for around

2 seconds, the screen shows 00.00.0 U.

Press

SNOOZE

to start the stop watch. The maxi-

mum time for the stop watch is 99 minutes and
59 seconds. If the stop watch exceeds the maxi-
mum time, 99:59.0 is displayed and flashes.

During time measurement, it can be stopped by
pressing

SNOOZE

.

Pressing

SNOOZE

again restarts the stop watch.

Hold down

SNOOZE

to reset the stop watch.

Leave the stop watch by pressing

PAGE

.

Countdown function

The countdown function is only available when
the radio is switched off.

Set and save countdown

Press and hold down the

MEMORY SCAN

button

for around 2 seconds, the screen shows
D 00.00.

Press the

UP

or

DOWN

button to set the

desired time.

5 countdown times are preset on the memory
buttons and you can open these directly using
the corresponding memory button:

Button

M.0/5

10:00

Button

M.1/6

30:00

Button

M.2/7

45:00

Button

M.3/8

60:00

Button

M.4/9

90:00

Press the

MEM

button to save the set time, the

memory space indicator

MEM

flashes on the

screen. Now use the

M.0/5

M.4/9

buttons to

select a memory space; when you press the
relevant memory key the time is saved in this
memory space and the time previously stored
there overwritten.

When the

MEMORY SCAN

button is pressed again

you leave the countdown mode.

Call up and activate the countdown function

Press and hold down the

MEMORY SCAN

button

for around 2 seconds, the screen shows
D 00.00.

Select the desired, saved countdown time with
the aid of the

M.0/5

M.4/9

memory buttons.

Press

SNOOZE

to start the countdown. Pressing

the

SNOOZE

button again pauses the countdown.

IB_KH2029_AR23586_LB3C 18.08.2008 15:56 Uhr Seite 10