Sunwave Tech. SRC-3820 - Manual (Page 42)

SRC-3820 User’s Manual
36
Using the Transmission Feature
The SRC-3820 can transmit inner data to another SRC-
3820 by the optional UART cable.
1. Take a UART cable and connect
the source SRC-3820 to another
target one.
2. On the source SRC-3820, enter the
setup mode and select TRANS
option and tap
to confirm.
3. A confirmation screen will pop up.
You are prompted to reconfirm the
action. Let 4 numbers disappear by
finger tapping.
4. During transmitting, the LCD will
show processing message as .
5. When the transmission is successful,
it will show “OK” message. In case
the transmission is failed, it will show
“ERROR” message.
6. Whatever it is successful or not, the
screen will back to the setup mode
when completion.