Sunwave Tech. SRC-3820 - Manual (Page 10)

4
Chapter 2 - Getting Started
This chapter provides you to get using the SRC-3820
quickly.
Installing Batteries
The SRC-3820 is powered up by four AAA Alkaline
batteries (excluded). Batteries must be inserted
before you operate the SRC-3820. For more
understanding, the following steps will guide you how
to install batteries.
1. Turn the remote over, push the tab in the direction of
the arrow on the battery cover and slide the cover off.
2. Insert batteries, matching each battery to the (+) and
(–) marks as shown in the battery case.
3. Replace the battery cover.