Sunwave Tech. SRC-3820 User Manual

Page 22

SRC-3820 User’s Manual

Selecting a code automatically

1. Turn on the target device that you

want to control.

2. Select a device you desire to

program in (TV for example).

3. Point the SRC-3820 at the target

device. Tap the AUTO key. An
“AUTO” message will be showed

on screen while the SRC-3820 is

automatically detecting
compatible codes. When the

device has been turned off, you

are required to press any button
or tap any key to stop searching

right away.

4. To make sure the code number is

compatible with the target

device, please press the POWER
button

for testing. If the

device can be turned on by SRC-
3820, you might take right code.

For more identification, go on
trying other keys. If code is

incorrect, please return to Step 3

to try another code until the end.
Note: Some codes may be

compatible for several
models.

5. If code is correct, please press

to confirm settings and exit.