Sunwave Tech. SRC-3820 - Manual (Page 23)

Code Menu
17
Using Code Learning Mode
The Learning function enables the SRC-3820 to program
other remote controls.
Learning from another Remote Control
Put the target remote control under the SRC-3820 and
point at the SRC-3820’s learning eye, which is located
at the bottom of the unit.
1. Select Learn option.
2. Tap to confirm.
3. Point the infrared eye of target
remote control at the learning
eye of SRC-3820 (see Page 3)
and keep apart between 2~4
inches (5~10cm).
4. Select a device to learn codes
from the target remote control
(AMP for example). The screen
firstly will display a page of soft
keys that correspond to under
hard buttons for you to learn
codes. Every key on screen will
be flashing. If you desire to end
off flashing on that key, you need
to learn the corresponding
button from your original remote
control now.