Sanyo VCC-ZM300 - Manual (Page 37)

VIEW SETTING
Slow shutter speed (LONG) mode setting
1 Use the cursor button (j or l) to move the cursor to
SHUTTER, then use the cursor button (d or c) to select
the speed mode for the electronic shutter. (Ex: LONG)
Then press the SET button.
The ES SETTING screen will appear and x1 (1/60 sec) will be
blinking. This setting is suitable for dark target objects.
Note: When a shutter speed is set, it can also be adjusted with
the “ ELS” button on the system controller.
2 Use the cursor button (d or c) to select a electronic
shutter speed.
Available settings: x1, x2, x4, x8, x16, x32 (Field times
shown as multiples.)
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note:
SHUTTER (LONG) cannot be set if any of the following settings is
active.
• MOTION: ON
• IRIS: AUTO item SENSE UP (activated) or MANU item El
(ON)
1 2
ES SETTING
SHUTTER SPEED x1
PRESET OFF
MENU BACK
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER LONG ‚
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
Eng
lish
36