Sony HANDYCAM DCR-PC1000 - Manual (Page 11)

11
Getting Started
DCR-PC1000 2-591-678-11(1)
Continued 
To charge the battery pack using the
AC Adaptor
Slide the POWER switch up to (CHG)OFF.
Then connect the AC Adaptor directly to
the DC IN jack on the camcorder.
POWER
switch DC IN jack
DC plug
Facing the
 mark
to the LCD screen.
AC Adaptor
To the wall outlet
Power cord
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both your camcorder and the
Handycam Station.
To remove the battery pack
Slide the POWER switch up to (CHG)OFF.
Then open the battery cover to remove the
battery pack.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 110).
To use an outside power source
You can operate your camcorder using the
power from the wall outlet by making the
same connections as you do when charging
the battery pack. The battery pack will not
lose its charge in this case.