Sony HANDYCAM DCR-PC1000 - Manual (Page 10)

10
DCR-PC1000 2-591-678-11(1)
4
Slide the POWER switch up to
(CHG) OFF. (The default setting.)
5
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station. Be sure that the
 mark
on the DC plug is facing up.
The  mark faces up.
6
Connect the power cord to the AC
Adaptor and the wall outlet.
7
Insert the camcorder into the
Handycam Station securely.
Be sure to insert the camcorder to the
end.
/CHG
(charge)
lamp
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged.
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover
on the camcorder.
Step2:Charging the battery pack (Continued)