Sangean RCR-8 User Manual
Page 14
13
6. If you make an error, press the Back button to delete the
character entered. Use the left and right arrows to move the block
cursor to access incorrectly entered characters.
7. After the final character of the WEP or WPA key has been entered,
locate the ‘END’ symbol and press the Select button. The radio
should now be able to connect to the network. And the display will
show
Operating controls
1. The majority of functions on your radio may be performed by using
the Tuning +/- and Select buttons on the top panel. Press Tuning +/-
to highlight the desired function, and then press on the Select button
to select that function. In this instruction booklet, press always
means press and release. Where a long press is needed to perform
an operation this is specifically stated in the text.
2. If an error is made when operating the menus, it is generally possible
to go back to the previous menu by pressing the Back button on the
top panel.